What should we pay attention to when assembling ringlock scaffolding?

The assembly of ringlock scaffolding is related to the safety questions in the construction process , and is an important part of the construction process, therefore, problems are not be allowed, otherwise the consequences are unimaginable. Steel ringlock scaffolding is now widely used in construction sites, so what should be paid attention to when the steel ringlock scaffolding is assembling ?

1, Before the erection of steel ringlock scaffolding, it is necessary to check all components, the severe twists and turns of the steel pipe, the severe corrosion and cracks of the fasteners are necessary to be scrapped and must not be used.

2. It is forbidden to pull wires on the scaffold. If there is a power line or electrical equipment, it is necessary to comply with the safety interval rules, and the power stop method is adopted when setting up and removing.

3, The ringlock scaffold shall not use steel, wood or steel and bamboo mix.( ringlok scaffolding supplies)

4. After ringlock scaffolding is established, the relevant personnel shall inspect ringlock scaffolding and issue written certificates before it can be used. The person in charge of the maintenance operation should check the situation of the scaffolding and catwallk and staircase used every day.If there are any problems , they must be repaired immediately.

5. When ringlock scaffold is accepted, the appearance of all components should be checked, and the acceptance listing should be implemented.

How to avoid the next building safety accident?The construction contractor should start with the details, the precautions for the establishment of scaffolding should not be ignored.Do not let the tragic drama perform again.